CD PROJEKT RED's open-world RPG. A showcase for ray tracing and path tracing with DLSS, FSR and XeSS support plus frame generation. Dense city areas and Crowd Density are hard on the CPU.
What limits performance in Cyberpunk 2077
Cyberpunk 2077 runs on REDengine 4 (Open-world action RPG, 2020). Official and researched system requirements:
Busy outdoor scenes like this are demanding on the GPU.
- Minimum: OS 64-bit Windows 10; CPU Core i7-6700 or Ryzen 5 1600; RAM 12 GB; GPU GeForce GTX 1060 6GB, Radeon RX 580 8GB or Arc A380; DirectX Version 12; Storage 70 GB (SSD required)
- Recommended: OS 64-bit Windows 10; CPU Core i7-12700 or Ryzen 7 7800X3D; RAM 16 GB; GPU GeForce RTX 2060 SUPER, Radeon RX 5700 XT or Arc A770; DirectX Version 12; Storage 70 GB (SSD required)
The settings that cost the most frames
Menu names and sections below are the ones in the game. Start here, test after each change, and keep the ones that give a clear gain.
- Resolution (Video): native resolution, or lower for more frames. Use your monitor's native resolution and scale with the upscaler.
- VSync (Video): Off. Use G-Sync/FreeSync with an FPS cap instead of V-Sync.
- Maximum FPS (Video): Off. Turn Maximum FPS on and set a value just below your refresh rate for smooth frame pacing.
- Ray Tracing (Graphics): Off. Ray tracing costs 10 to 15 FPS at 4K in testing. Enable it (and path tracing) only on an RTX 5070 Ti, RX 9070 XT or faster.
- Cascaded Shadows Range (Graphics): Low on the Low preset up to High on Ultra. Guides call this one of the real FPS drains and it is CPU-heavy; lower it before the resolution.
- Cascaded Shadows Resolution (Graphics): Low on the Low preset up to High on Ultra. Sharper near shadows; more visible than the range setting.
- Volumetric Fog Resolution (Graphics): Low on the Low preset up to High on Ultra. Guides report about 10% FPS cost for little visible difference; Low or Medium is enough.
- Volumetric Cloud Quality (Graphics): Low on the Low preset up to High on Ultra. Cloud rendering; Medium is hard to tell apart from High.
- Screen Space Reflections Quality (Graphics): Low on the Low preset up to High on Ultra. Reflections in puddles and windows; one of the more expensive options in the city at night.
- Ambient Occlusion (Graphics): Off on the Low preset up to High on Ultra. Contact shadows in corners; Medium is a good value.
- Level of Detail (LOD) (Graphics): Low on the Low preset up to High on Ultra. Distance at which models switch to simpler versions; High avoids visible pop-in.
- Crowd Density (Gameplay): Low on the Low preset up to High on Ultra. Number of pedestrians and cars; mainly a CPU cost, so lower it first on slower processors.
Smaller options
| Setting | Where | Recommended |
|---|---|---|
| Motion Blur | Graphics | Off |
| Film Grain | Graphics | Off |
| Max Dynamic Decals | Graphics | Low on the Low preset up to Ultra on Ultra |
Upscaling and frame generation
Upscalers: DLSS, FSR, XeSS, DLAA. Frame generation: DLSS, FSR. Latency reduction: NVIDIA Reflex and AMD Anti-Lag 2.
- NVIDIA Reflex / FSR Anti-Lag 2 (Video). Options: Off, On, On + Boost. Reduces input latency, especially with frame generation. Reflex is for NVIDIA GPUs; Update 2.5 added a separate Anti-Lag 2 toggle for Radeon.
- Resolution Scaling (Graphics). Options: Off, DLSS Super Resolution, FSR 4 (RX 9000) or FSR 2.1, XeSS, DLAA. DLSS on NVIDIA, FSR on AMD (FSR 4 needs an RX 9000 card and the matching driver, otherwise FSR 2.1), XeSS on Intel Arc. DLSS options such as DLAA and Ray Reconstruction sit in an NVIDIA DLSS block on the same page. Avoid Performance if you can.
- Frame Generation (Graphics). Options: Off, DLSS Frame Generation, FSR 3.1 Frame Generation. Only turn it on with a base frame rate around 40 fps or more; below that the game feels laggy.
How to show the FPS counter
- Cyberpunk 2077 has no built-in FPS counter in its settings (none appears in the Update 2.3 or 2.5 notes).
- Use Steam: Settings > In Game > "In-game FPS counter" and choose a corner.
- Or use the NVIDIA app overlay (Alt+R) or the AMD Software performance metrics overlay.
More Cyberpunk 2077 tips
Test in a busy street
- Guides advise testing settings in a dense street, not an empty room or alley.
- City traffic and crowds are where the CPU and Crowd Density matter.
Path tracing needs a fast GPU
- Pick Ray Tracing: Overdrive in the Quick Preset, or enable "Path Tracing (Technology Preview)" in the Ray Tracing section.
- One 2026 guide puts 1440p path tracing at an RTX 5070 Ti or RX 9070 XT with upscaling and frame generation.
FSR 4 on AMD
- Update 2.3 added AMD FSR 4 for compatible Radeon GPUs, FSR 3.1 frame generation and Intel XeSS 2.0.
- The FSR 4 option only appears once the supporting AMD driver is installed, and it needs an RX 9000 card.
- Update 2.5 (October 2026) removed the FSR 3 upscaler: use FSR 4 or FSR 2.1, with FSR 3.1 frame generation on top if you want it.
DLSS 4.5 is built in
- Update 2.5 added native DLSS 4.5 with (dynamic) multi frame generation, so Nvidia App overrides are no longer needed.
- Frame generation still needs a base frame rate of about 40 fps or more to feel responsive.
Quick checks that help in any game
Before you spend an hour in the menus, rule out the common system-level causes of low FPS and stutter in Cyberpunk 2077:
- Update your graphics driver and restart. Game-ready drivers often include fixes for new releases.
- Set the Windows power plan to Balanced or High performance, and turn on Game Mode.
- Enable the XMP or EXPO memory profile in your BIOS. Many PCs run RAM below its rated speed, which costs frames in CPU-limited games.
- Install the game on an SSD, not a hard drive, to avoid hitching when assets stream in.
- Close browsers, launchers and overlays you do not need. Each one takes CPU time and memory.
- Watch your temperatures. A CPU or GPU that overheats lowers its clocks, and the result is lower, uneven frame rates.
- Match the frame cap to your monitor, or use adaptive sync so a steady frame rate does not tear.
How to test a change properly
Change one setting at a time and repeat the same short test, ideally in the same place or mode, while watching both the average and the lowest frame rates. The 1% lows tell you more about smoothness than the average does. If a setting changes the picture a lot but the frame rate barely moves, put it back; if it moves the frame rate a lot and the picture barely changes, keep it lower. Check whether the GPU or CPU is the one running at 95 to 100 percent: lowering resolution-related settings only helps when the GPU is the bottleneck, while lowering view distance, crowd and physics options is what helps when the CPU is.
Best settings for your hardware
Every PC is different, so the best choice depends on your CPU, graphics card and monitor. On DontLag you can find recommended settings for each hardware tier on the Cyberpunk 2077 settings page.
Sources
- store.steampowered.com: Cyberpunk_2077
- cyberpunk.net: update 2 3 patch notes
- rog.asus.com: cyberpunk 2077 on the rog ally performance guide best settings