How to set your monitor to its full refresh rate
Windows often leaves a new 144 Hz or 240 Hz monitor on 60 Hz. Here is how to change it, and what to check when the higher option is missing.
Change the refresh rate in Windows 11
Windows tends to pick a safe 60 Hz when you plug in a new display, so the first job is to raise it yourself. Each monitor has its own setting.
- Open Settings > System > Display.
- Scroll down and select "Advanced display".
- Pick your monitor in the list at the top if you have more than one.
- Under "Choose a refresh rate", select the highest value, such as 144 Hz or 240 Hz.
- Click "Keep changes" within 15 seconds, otherwise Windows reverts.
If the higher rate is missing: check the cable
The cable and port set the limit. As rough guides: HDMI 2.0 and DisplayPort 1.2 handle 240 Hz at 1080p and 144 Hz at 1440p, but only 60 Hz (HDMI 2.0) or 75 Hz (DisplayPort 1.2) at 4K. For high refresh rates at 4K you need DisplayPort 1.4 or newer, or HDMI 2.1 on both the graphics card and monitor with an Ultra High Speed HDMI cable.
Use DisplayPort for gaming monitors whenever possible. Check your monitor's spec sheet for the exact limits per port.
- Plug the cable that came with the monitor into the graphics card, not the motherboard.
- Try the monitor's DisplayPort input instead of HDMI.
- In the monitor's on-screen menu, look for a setting for the input version (for example DisplayPort 1.4 or HDMI 2.1) or a "high refresh rate" mode and enable it.
If it is still missing: drivers
Install the latest graphics driver (see our driver guide). If it still fails, lower the resolution or turn off HDR for a moment to see whether the bandwidth limit is the cause.
Set it inside the game too
Some games run at 60 Hz in fullscreen unless you choose the refresh rate in their own video settings. Look for a "Refresh Rate" or resolution list entry with your monitor's Hz value, and set the FPS cap just below it if you use G-SYNC or FreeSync.
Sources: helpdeskgeek.com, geekrewind.com, coolblue.be, intel.com