Skip to content
Set up my rig

DLSS, FSR, XeSS and frame generation explained

What upscalers and frame generation do, what Quality, Balanced and Performance actually mean, and which technology your GPU can run.

Headphones next to a keyboard at night

What an upscaler does

An upscaler renders the game at a lower resolution than your monitor and then reconstructs a sharp full-resolution image. Because the GPU draws fewer pixels, frame rate goes up. On a 4K monitor, DLSS Quality renders at 1440p internally and displays at 4K.

The three main technologies are NVIDIA DLSS (needs an RTX GPU), AMD FSR (runs on almost any GPU, with the best version limited to newer Radeons) and Intel XeSS (best on Intel Arc, works on other GPUs too).

What Quality, Balanced and Performance mean

The mode sets the internal render resolution as a share of the output resolution on each axis. The pixel count falls faster than the percentage suggests, because the scale applies to both width and height.

  1. Quality: about 67% per axis, roughly 44% of the pixels.
  2. Balanced: about 58% per axis, roughly 34% of the pixels.
  3. Performance: 50% per axis, 25% of the pixels.
  4. Ultra Performance: about 33% per axis, intended for very high output resolutions.
  5. DLAA: 100%, native resolution with AI anti-aliasing. It does not add FPS; it makes the image look better.

Which mode to pick

Start at Quality. At 1440p and 4K, Quality and Balanced look very close to native on a modern upscaler. At 1080p the internal resolution is already low, so start with Quality and step down only if you need to. If you already hit your target frame rate, use DLAA or no upscaling.

Upscalers also soften distant detail, which matters in competitive shooters where spotting a distant player is the whole job. For those games, only use one if your GPU cannot reach your target otherwise.

DLSS 4 and DLSS 4.5

DLSS 4 introduced the transformer model for Super Resolution, which is sharper and more stable than the older CNN model. NVIDIA announced DLSS 4.5 at CES 2026 with a second-generation transformer model that works on all GeForce RTX GPUs.

Frame generation is a separate feature: DLSS Frame Generation needs an RTX 40 series or newer, and Multi Frame Generation (several generated frames per rendered frame) is limited to RTX 50 series. DLSS 4.5 adds 6x and Dynamic Multi Frame Generation, also RTX 50 only. The NVIDIA app can update older games to a newer DLSS model.

FSR 3 and FSR 4

FSR 3.1 is a hand-tuned algorithm that runs on most GPUs, including NVIDIA and Intel. FSR 4 uses machine learning for much better image quality, but it runs on Radeon RX 9000 series cards (RDNA 4). AMD's machine-learning frame generation is also RDNA 4 only. Whether the machine-learning upscaling reaches older Radeon cards has been reported inconsistently, so check AMD's notes for your card.

In a game, FSR 4 only appears when the game supports it and the matching Adrenalin driver is installed.

XeSS

XeSS uses the XMX AI hardware on Intel Arc GPUs for its best quality and a simpler path on other GPUs. XeSS 2.0 adds frame generation on compatible hardware, as in Cyberpunk 2077 since patch 2.3.

Frame generation: smoother, not faster

Frame generation inserts extra frames between real ones. The counter says 120 fps, but the game still reacts at the speed of the real frames, and the technique adds a little input latency. It works well when the base frame rate is already around 40 to 60 fps or more, especially in single-player games.

Do not use it to rescue a slow game: below that, the delay is noticeable and artefacts get worse. In competitive shooters, keep it off.

How DontLag uses this

The recommendations pick the best available upscaler for your GPU and the mildest mode that still reaches your target frame rate, and only suggest frame generation when the base frame rate and game type make sense.

Sources: nvidia.com, tweaktown.com, windowscentral.com, cyberpunk.net, engadget.com