Skip to content
Set up my rig

DLSS vs FSR vs XeSS in 2026: Which Upscaler Should You Use?

All three upscalers can raise your frame rate, but they run on different hardware. Here is what each one does in 2026 and which to switch on for your graphics card.

DontLag ·

DLSS vs FSR vs XeSS in 2026: Which Upscaler Should You Use?

Use DLSS if you own a GeForce RTX card, FSR 4 if you own a Radeon RX 9000 (or FSR upscaling 4.1 on an RX 7000 or RX 6000), and XeSS on an Intel Arc card. If your card is older or from another vendor, pick the option the game offers that your GPU supports. The three do the same basic job, render fewer pixels and rebuild a sharp image, but the newest extras such as AI frame generation are tied to specific hardware.

What do upscalers and frame generation actually do?

An upscaler renders the game at a lower internal resolution and reconstructs a higher-resolution picture, which frees up GPU time and raises the frame rate. Frame generation is a separate step: it creates extra frames between the ones the game renders. Upscaling lowers the cost of every frame; frame generation raises the number of frames shown without making the game itself run faster, so the controls do not respond any quicker. That is why vendors pair it with a latency feature (NVIDIA Reflex, Intel XeLL).

At a glance

DLSS (NVIDIA)FSR (AMD)XeSS (Intel)
Current generationDLSS 4.5 (second-generation transformer model for Super Resolution and Ray Reconstruction)FSR Upscaling 4.1.2 and FSR Frame Generation 4.0.2 (machine-learning based)XeSS 3: Super Resolution, Frame Generation with Multi Frame Generation, Xe Low Latency
Upscaling runs onGeForce RTX 20, 30, 40 and 50 seriesRadeon RX 9000, 7000 and 6000 series (ML model); an analytical fallback exists for GPUs that cannot run itIntel Arc and Iris Xe; a cross-vendor version runs on other GPUs with Shader Model 6.4 or later
Frame generation runs onRTX 40 and 50 seriesML version: Radeon RX 9000 and newer; analytical FSR 3.1 version for other GPUs, including RDNA 2DirectX 12 on Intel Arc (with XMX) and Meteor Lake graphics (not Iris Xe), and single-frame generation on other vendors with XeLL
Multiple generated framesUp to five generated frames per rendered frame, RTX 50 onlyNot offered in the SDK versions listed hereUp to three, Intel hardware only
Ray-tracing denoiserRay Reconstruction (RTX 20 to 50)Ray Regeneration (Radeon RX 9000 and newer, DirectX 12, Windows 11)None listed

Status as of November 2026. NVIDIA also released DLSS 5 on 3 September 2026 for RTX 50 cards only; it is a neural lighting and material pass that extends the pipeline and does not replace Super Resolution or Frame Generation. These tools update quickly, so check the version a game ships.

DLSS: the widest feature set, but only on RTX

NVIDIA lists Super Resolution, DLAA (AI anti-aliasing at native resolution) and Ray Reconstruction on every RTX generation from 20 to 50. Frame Generation needs an RTX 40 or 50 card, and Multi Frame Generation, which can create up to five extra frames per rendered frame, needs an RTX 50. DLSS 4.5 added a second-generation transformer model for Super Resolution and Ray Reconstruction; NVIDIA says the new model is available for all GeForce RTX GPUs, but RTX 20 and 30 cards lack native FP8, so the newer models cost them more performance and owners may prefer to stay on the DLSS 4.0 model.

FSR: now machine-learning based, with a split by generation

FSR 4 moved AMD's upscaler to a machine-learning model. AMD's SDK lists FSR Upscaling 4.1.2 for Radeon RX 9000, 7000 and 6000 series, plus selected Ryzen AI chips. RX 7000 owners received FSR 4.1 earlier in 2026, and Adrenalin 26.10.1 (20 October 2026) extended it to the RX 6000 series. The ML frame generation (4.0.2), Ray Regeneration and the newer Redstone features are limited to the RX 9000 series and newer. Older cards still get FSR 3.1 frame generation, which AMD calls analytical (no machine learning), so you keep a frame generation option without the new model.

XeSS: the cross-vendor option

XeSS 3 bundles Super Resolution, Frame Generation and Xe Low Latency. Intel's own version is designed for Arc GPUs and Iris Xe, while a cross-vendor version runs on GPUs with Shader Model 6.4 or later; Intel recommends DP4a acceleration and lists GeForce 30 series and Radeon 6000 series and newer. Multi Frame Generation (up to three generated frames per rendered frame) is limited to Intel hardware, and frame generation needs Xe Low Latency for frame pacing on every vendor.

Which one should you switch on?

  1. GeForce RTX: use DLSS. Start with Quality or Balanced and only add frame generation once the base frame rate is already comfortable.
  2. Radeon RX 9000: use FSR 4 upscaling; add frame generation if the game offers it.
  3. Radeon RX 7000 or 6000: use FSR upscaling 4.1 where the game supports it. Expect a cost on older cards, so compare it with the older FSR 3.1 mode in the same scene.
  4. Intel Arc: use XeSS.
  5. GTX or other older cards: try the FSR 3.1 or XeSS cross-vendor option, whichever the game provides, and check that it actually beats lowering the render resolution yourself.

Frequently asked questions

Is DLSS better than FSR?

The best choice is the one your card can run in the highest-quality mode. DLSS has the widest set of features, but quality differs per game, so judge each title on your own screen.

Does frame generation reduce lag?

No. It raises the displayed frame rate, but the game still reads your input at the rendered frame rate, which is why the vendors add Reflex or XeLL. Keep frame generation for single-player games and use plain upscaling in fast competitive shooters.

Can I use FSR on an NVIDIA card?

The analytical FSR 3.1 modes are intended for GPUs without the newer model. Whether a particular game exposes them for a GeForce card depends on the game.

Related guides