Checked in November 2026 against the community ballistics chart, which matches every round in the first six tables below. The official notes up to patch 1.3.0.0 show no ammo stat changes since the 1.0.0.2 fix for 7.62x51 parameters. Confirm the numbers on the item screen before you buy in bulk.
The best ammo is the cheapest round that can still beat the armour you expect to meet. For most raids that means a round with at least penetration 40 to 45, which handles armour class 4 reliably. Inside one caliber the cheap rounds are fine for Scavs, and the high-penetration rounds are for players in plate carriers. This guide lists the useful rounds of eleven calibers, ordered from budget to best. For the basics of armour and plates, read our ammo and armor guide first.
How do I read the tables?
Each table shows damage, penetration power and how the round performs against armour classes 3, 4 and 6. The last three columns use the community scale from 0 to 6, based on how many shots the armour stops on average:
| Score | Meaning |
|---|---|
| 6 | Usually ignores the armour, penetrates more than 80% of the time at first |
| 5 | Very effective, the armour stops about 1 to 3 shots |
| 4 | Effective, 3 to 5 shots |
| 3 | Slightly effective, 5 to 9 shots |
| 2 or lower | Magdump at best, or pointless |
The tables assume every shot hits the armour. A name ending in S is subsonic. Damage comes from the bullet alone, not from the gun. When a bullet does not penetrate, you still take blunt damage, and a bullet that does penetrate does between 0% and 40% less damage than its listed value.
How do I pick a round?
- Decide the armour you expect. Scavs and players on a budget wear lighter armour, geared players wear class 5 and 6.
- Pick the cheapest round in your caliber with a score of 5 or 6 against that class.
- Use a higher-damage but lower-penetration round only against unarmoured targets such as Scavs.
- Keep one stack of premium rounds for the last fight, not for every raid.
Best 5.45x39mm ammo
Class 4 is the target here. PS gs is a budget round that works on Scavs. BP gs is the usual all-rounder because it beats class 4 and still hits hard. BS gs and Igolnik are for plated opponents, with Igolnik giving up a lot of damage to get its penetration.
| Round | Damage | Penetration | Vs class 3 | Vs class 4 | Vs class 6 |
|---|---|---|---|---|---|
| 5.45x39mm PS gs | 56 | 28 | 5 | 3 | 0 |
| 5.45x39mm PP gs | 51 | 34 | 6 | 4 | 1 |
| 5.45x39mm BP gs | 48 | 45 | 6 | 6 | 4 |
| 5.45x39mm BS gs | 45 | 54 | 6 | 6 | 5 |
| 5.45x39mm PPBS gs Igolnik | 37 | 62 | 6 | 6 | 6 |
Best 5.56x45mm NATO ammo
M855 is cheap and fine against unarmoured targets, but it stops being useful against class 4. M855A1 is the standard step up for most players, and M995 is the premium option with the lowest damage of the three.
| Round | Damage | Penetration | Vs class 3 | Vs class 4 | Vs class 6 |
|---|---|---|---|---|---|
| 5.56x45mm M855 | 54 | 31 | 5 | 3 | 0 |
| 5.56x45mm M855A1 | 49 | 44 | 6 | 6 | 4 |
| 5.56x45mm M995 | 42 | 53 | 6 | 6 | 5 |
Best 7.62x39mm ammo
PS gzh handles lighter armour. BP gzh is the balanced pick for class 4, and MAI AP is the high-penetration round for heavier armour at a lower damage per hit.
| Round | Damage | Penetration | Vs class 3 | Vs class 4 | Vs class 6 |
|---|---|---|---|---|---|
| 7.62x39mm PS gzh | 61 | 35 | 6 | 5 | 2 |
| 7.62x39mm BP gzh | 58 | 47 | 6 | 6 | 4 |
| 7.62x39mm MAI AP | 53 | 58 | 6 | 6 | 5 |
Best 7.62x51mm NATO ammo
This caliber starts high. Even M80 has strong damage and reliably beats class 4. M61 and M993 are the rounds for players in the heaviest armour, and they cost much more.
| Round | Damage | Penetration | Vs class 3 | Vs class 4 | Vs class 6 |
|---|---|---|---|---|---|
| 7.62x51mm M80 | 80 | 43 | 6 | 6 | 5 |
| 7.62x51mm M61 | 73 | 60 | 6 | 6 | 6 |
| 7.62x51mm M993 | 70 | 65 | 6 | 6 | 6 |
Best 9x19mm Parabellum ammo
A pistol caliber used in SMGs. Pst gzh cannot beat class 4 armour at all. AP 6.3 is the budget armour-piercing choice, and PBP gzh is the best performer but has the lowest damage.
| Round | Damage | Penetration | Vs class 3 | Vs class 4 | Vs class 6 |
|---|---|---|---|---|---|
| 9x19mm Pst gzh | 54 | 20 | 2 | 0 | 0 |
| 9x19mm AP 6.3 | 52 | 30 | 6 | 4 | 1 |
| 9x19mm PBP gzh | 44 | 39 | 6 | 5 | 3 |
Best 9x39mm ammo
These rounds are subsonic, so they are quiet. SP-6 and BP are the strong penetrators, and SPP is the cheaper round for lightly armoured targets.
| Round | Damage | Penetration | Vs class 3 | Vs class 4 | Vs class 6 |
|---|---|---|---|---|---|
| 9x39mm SP-5 gs S | 71 | 28 | 5 | 2 | 0 |
| 9x39mm SPP gs S | 68 | 35 | 6 | 5 | 2 |
| 9x39mm SP-6 gs S | 60 | 48 | 6 | 6 | 5 |
| 9x39mm BP gs S | 58 | 54 | 6 | 6 | 5 |
Best 5.7x28mm ammo
The FN caliber has a very flat curve. SS197SR is cheap but stops working on class 4. SS190 is the real answer for plated targets, while L191 is the tracer version of a mid-tier round.
| Round | Damage | Penetration | Vs class 3 | Vs class 4 | Vs class 6 |
|---|---|---|---|---|---|
| 5.7x28mm SS197SR | 62 | 25 | 4 | 1 | 0 |
| 5.7x28mm SB193 S | 59 | 27 | 5 | 2 | 0 |
| 5.7x28mm L191 T | 53 | 33 | 6 | 3 | 2 |
| 5.7x28mm SS190 | 49 | 37 | 6 | 5 | 3 |
Best 4.6x30mm ammo
FMJ SX is the all-rounder and AP SX is the premium round with the lowest damage of the set. JSP SX is only for light armour.
| Round | Damage | Penetration | Vs class 3 | Vs class 4 | Vs class 6 |
|---|---|---|---|---|---|
| 4.6x30mm JSP SX | 46 | 32 | 6 | 4 | 1 |
| 4.6x30mm FMJ SX | 43 | 40 | 6 | 6 | 3 |
| 4.6x30mm AP SX | 35 | 53 | 6 | 6 | 5 |
Best .45 ACP ammo
Only the AP round beats armour. Match FMJ is for unarmoured targets.
| Round | Damage | Penetration | Vs class 3 | Vs class 4 | Vs class 6 |
|---|---|---|---|---|---|
| .45 ACP Match FMJ S | 72 | 25 | 3 | 1 | 0 |
| .45 ACP AP S | 66 | 38 | 6 | 5 | 2 |
Best 6.8x51mm ammo
The SIG Hybrid is the round to use against heavy armour. FMJ trades penetration for 80 damage.
| Round | Damage | Penetration | Vs class 3 | Vs class 4 | Vs class 6 |
|---|---|---|---|---|---|
| 6.8x51mm SIG FMJ | 80 | 36 | 6 | 5 | 2 |
| 6.8x51mm SIG Hybrid | 72 | 47 | 6 | 6 | 5 |
Best .366 TKM ammo
EKO is the cheap armour answer for mid-class armour and AP-M is the proper premium round.
| Round | Damage | Penetration | Vs class 3 | Vs class 4 | Vs class 6 |
|---|---|---|---|---|---|
| .366 TKM FMJ | 98 | 23 | 4 | 1 | 0 |
| .366 TKM EKO | 73 | 30 | 6 | 3 | 0 |
| .366 TKM AP-M | 90 | 42 | 6 | 6 | 4 |
Does armour durability change the result?
Yes. The tables assume fresh armour. The less durability a piece has left, measured as a percentage of its maximum, the less protection it gives, so a worn plate is easier to beat than the class number suggests. Armour made of different materials also loses durability at different speeds and repairs differently: ceramic plates wear fastest per hit, while UHMWPE plates can be repaired many times and keep most of their protection. Aim for the cheapest round that beats the armour you expect, and expect a bit more from plates that are already damaged.
Why not just use the highest penetration?
Penetration is not the whole fight. The best-armour-piercing rounds usually deal the least damage per hit, so you need more hits to kill unarmoured targets, and they cost far more. If you carry premium ammo into every raid you will lose it quickly. Match the round to the opponent and the price to your stash. For gear to pair with your ammo, see our best budget loadouts.
Frequently asked questions
Does the gun change the bullet's damage? No. The listed damage and penetration come from the ammo only.
Is higher damage better? Only against targets without armour. Against armour, penetration decides the outcome.
Did patches change ammo prices? Patch 1.1.0.0 (August 2026) reduced the price of a few basic rounds, such as 5.45x39mm FMJ and 5.56x45mm FMJ, and moved several popular ammo types down one trader loyalty level so they unlock earlier. Compare traders and the flea market before you buy.
How do I check a round in game? Open the item screen of the ammo. Penetration and damage are shown there, and they are the numbers that count after a patch.