Battlestate Games' hardcore extraction shooter on Unity. Famously CPU- and RAM-bound: a fast processor and lots of memory matter more than the graphics card, and shadows and visibility settings decide how well you spot enemies.
Battlestate Games has announced update 1.3.5.0, a move to the Unity 6 engine, for mid-November 2026. Performance and some graphics options may change after it, so re-test your settings once it lands.
What limits performance in Escape from Tarkov
Escape from Tarkov runs on Unity (Hardcore extraction shooter, 2025 (1.0)). Official and researched system requirements:
- Minimum: OS Windows 10; CPU AMD Ryzen 5 3600 or similar; RAM 16 GB; GPU GTX 1660 or similar; DirectX Version 11; Storage 80 GB
- Recommended: OS Windows 11; CPU Intel Core i7-14700F or better; RAM 64 GB; GPU RTX 4070 or better; DirectX Version 11; Storage 80 GB
The settings that cost the most frames
Menu names and sections below are the ones in the game. Start here, test after each change, and keep the ones that give a clear gain.
- Screen resolution (Graphics): native resolution, or lower for more frames. Use your monitor's native resolution.
- VSync (Graphics): Off. V-Sync adds input lag.
- Shadows quality (Graphics): Low. Nearly every guide uses Low: it gains FPS, and dark shadows are easier to see into.
- Object LOD quality (Graphics): 2 on the Low preset up to 2.5 on Ultra. How far objects keep full detail. Values of 2 to 2.5 are the usual compromise.
- Overall visibility (Graphics): 1000 on the Low preset up to 1500 on Ultra. View distance in metres. About 1000 is enough for most maps; open maps like Woods benefit from more.
- HBAO (Graphics): Off. Ambient occlusion darkens corners; costs FPS and adds no competitive value.
- SSR (Graphics): Off. Screen-space reflections; guides turn them off for FPS.
- Resampling (Graphics): 1x off. Resampling renders above or below native resolution; keep it off and use DLSS or FSR for scaling.
- Grass shadows (Graphics): Off. Grass shadows cost FPS on foliage-heavy maps.
Smaller options
| Setting | Where | Recommended |
|---|---|---|
| Screen mode | Graphics | Borderless |
| Texture quality | Graphics | Low on the Low preset up to Ultra on Ultra |
| Anti-aliasing | Graphics | TAA |
| Mip Streaming | Graphics | Off |
| Z-Blur | Graphics | Off |
| Chrom. aberrations | Graphics | Off |
| Noise | Graphics | Off |
Upscaling and frame generation
Upscalers: DLSS, FSR. No frame generation is listed. Latency reduction: NVIDIA Reflex.
- NVIDIA DLSS / AMD FSR 2.2 (Graphics). Options: Off, NVIDIA DLSS, AMD FSR 2.2. Upscaling can blur distant enemies and Tarkov is usually CPU-bound, so only use it if the GPU is the limit. Keep AMD FSR 1.0 off. Guides disagree on whether newer builds list FSR 3 here; use whichever FSR entry your menu shows.
- NVIDIA Reflex Low Latency (Graphics). Options: Off, On, On + boost. Lowers system latency on NVIDIA GPUs; some guides leave it off if you see stutter.
How to show the FPS counter
- Open the in-game console (the ~ key) and type fps 1; it shows the limit, FPS and network latency in the top right.
- Type fps 3 for more information, or fps 0 to hide it again.
- Alternative: Steam > Settings > In Game > "In-game FPS counter", or the NVIDIA app overlay.
More Escape from Tarkov tips
CPU and RAM matter most
- Tarkov is CPU-bound, so graphics changes help less than a faster processor and more memory.
- Enable XMP/EXPO and keep 32 GB of RAM or more; the Steam page recommends 64 GB.
- Install the game on an SSD to avoid long raid loading times.
Streets of Tarkov
- Streets is the most demanding map. One guide recommends switching on "Streets of Tarkov Lower Texture Resolution Mode" in the Graphics tab if you struggle there.
Check for older advice
- Many Tarkov guides predate the 1.0 release. If an option is named differently, use the labels on your Graphics tab.
Quick checks that help in any game
Before you spend an hour in the menus, rule out the common system-level causes of low FPS and stutter in Escape from Tarkov:
- Update your graphics driver and restart. Game-ready drivers often include fixes for new releases.
- Set the Windows power plan to Balanced or High performance, and turn on Game Mode.
- Enable the XMP or EXPO memory profile in your BIOS. Many PCs run RAM below its rated speed, which costs frames in CPU-limited games.
- Install the game on an SSD, not a hard drive, to avoid hitching when assets stream in.
- Close browsers, launchers and overlays you do not need. Each one takes CPU time and memory.
- Watch your temperatures. A CPU or GPU that overheats lowers its clocks, and the result is lower, uneven frame rates.
- Match the frame cap to your monitor, or use adaptive sync so a steady frame rate does not tear.
How to test a change properly
Change one setting at a time and repeat the same short test, ideally in the same place or mode, while watching both the average and the lowest frame rates. The 1% lows tell you more about smoothness than the average does. If a setting changes the picture a lot but the frame rate barely moves, put it back; if it moves the frame rate a lot and the picture barely changes, keep it lower. Check whether the GPU or CPU is the one running at 95 to 100 percent: lowering resolution-related settings only helps when the GPU is the bottleneck, while lowering view distance, crowd and physics options is what helps when the CPU is.
Best settings for your hardware
Every PC is different, so the best choice depends on your CPU, graphics card and monitor. On DontLag you can find recommended settings for each hardware tier on the Escape from Tarkov settings page.