Phantom Blade Zero requires an SSD and uses Denuvo anti-tamper protection on every PC tier, according to its Steam store page and S-GAME's own published specs. The minimum tier targets 1080p at 30 FPS with upscaling enabled, not a native 1080p30 experience.
How long these specs have been stable
S-GAME published its PC system requirements page about two and a half months before launch, well ahead of most PC releases that only confirm specs in the final weeks. The requirements stayed the same between that initial post and the game's actual October 2026 launch, with the only addition being the confirmed install size once the Steam preload opened. That stability is worth noting since many PC ports quietly raise their minimum requirements close to release once more hardware has been tested against the final build; Phantom Blade Zero's did not change.
What upscaling enabled means for these targets
Every listed target, from the 1080p30 minimum to the 2160p60 path tracing tier, assumes an upscaler such as DLSS, FSR or a platform equivalent is switched on rather than rendering natively at that resolution. This is standard practice for recent Unreal Engine titles with heavy ray tracing options, but it does mean that a GPU meeting the minimum spec will likely need to run below native 1080p internally to hit the listed 30 FPS target, with the upscaler reconstructing the final image.
Minimum requirements
The minimum tier is built around a GTX 1660 or RX 5500 XT, both 6 to 8 GB cards, paired with 16 GB of RAM. These targets assume upscaling is switched on to hit the listed 30 FPS at 1080p.
| Component | Minimum |
|---|---|
| OS | Windows 10/11 64-bit |
| Processor | Intel Core i7-8700K / AMD Ryzen 5 3600 |
| Memory | 16 GB RAM |
| Graphics | NVIDIA GeForce GTX 1660 6GB / AMD Radeon RX 5500 XT 8GB |
| DirectX | Version 12 |
| Storage | SSD required, about 145 GB |
| Target | 1080p / 30 FPS with upscaling enabled |
Recommended requirements
The recommended tier steps up to an RTX 3060 Ti or RX 6700 XT and targets 1440p at 60 FPS, again with upscaling enabled rather than native rendering.
| Component | Recommended |
|---|---|
| Processor | Intel Core i5-10600K / AMD Ryzen 5 5600X |
| Memory | 16 GB RAM |
| Graphics | NVIDIA GeForce RTX 3060 Ti 8GB / AMD Radeon RX 6700 XT 12GB |
| Target | 1440p / 60 FPS with upscaling enabled |
Ray tracing and path tracing tiers
S-GAME's own system requirements page also lists two higher tiers beyond what Steam shows. The ray tracing tier recommends an RTX 5060 for 1080p at 60 FPS, and the path tracing tier recommends an RTX 5080 for 2160p at 60 FPS, both still with upscaling enabled. There is no listed 4K tier without ray tracing, and no ultra-specific hardware recommendation beyond these two.
Storage and install size
Phantom Blade Zero needs roughly 145 GB of SSD space, and S-GAME asked players to keep at least 300 GB free during the preload window before launch to accommodate the download and installation process. An SSD is required at every tier; the game is not supported on a traditional hard drive.
What Denuvo means for this game
Steam's store page lists Denuvo as a third-party DRM requirement, meaning the PC version needs an internet connection at least for initial activation and may periodically re-verify your license. Beyond the listed notice, neither Steam nor S-GAME has published details on how the protection behaves during normal play or whether it will be removed in a later patch, so there is nothing further confirmed about its day-to-day impact.
Why the DirectX 12 requirement matters
All four tiers, from minimum through path tracing, list DirectX 12 as a fixed requirement rather than a scaling option. This is typical for Unreal Engine 5 titles that rely on modern rendering features such as hardware ray tracing and advanced lighting, and it rules out running the game on older graphics APIs even at the lowest settings. Anyone upgrading an older PC specifically for Phantom Blade Zero should confirm their motherboard, chipset drivers and GPU all support DirectX 12 before buying new hardware based on the listed specs alone.
FAQ
Does Phantom Blade Zero need an SSD?
Yes, at every tier from minimum to path tracing. The game's listed specs do not include a hard drive option.
Can I run Phantom Blade Zero without Denuvo being an issue?
The Steam store page lists Denuvo as a required third-party DRM. Beyond the notice itself, no further detail about its in-game behavior has been published.
What GPU do I need for 1440p 60 FPS?
An RTX 3060 Ti or RX 6700 XT, according to the official recommended tier, both assuming upscaling is enabled rather than native rendering.
Is there a 4K requirements tier?
Only through the path tracing tier, which recommends an RTX 5080 for 2160p at 60 FPS. There is no separate 4K tier without ray tracing enabled.
Phantom Blade Zero targets 1440p at 60 FPS on its recommended tier, with upscaling enabled.
For a full breakdown of settings by hardware tier, see the Phantom Blade Zero settings page, and check the Phantom Blade Zero guides hub for combat and difficulty guides.