Skip to content
Set up my rig

Dota 2: how to get more FPS and less lag

Practical advice to raise your frame rate and cut lag in Dota 2: what limits performance, the settings that cost the most frames, upscaling, how to show FPS and network tips.

DontLag · · updated Nov 12, 2026

Dota 2: how to get more FPS and less lag

Valve's free-to-play 5v5 MOBA on Source 2. Frame rate is limited by one fast CPU core far more than by the graphics card, and busy teamfights are where effects and shadows cost the most. Frame rate holds up best with a fast CPU and fast RAM.

What limits performance in Dota 2

Dota 2 runs on Source 2 (MOBA, 2013). Official and researched system requirements:

  • Minimum: OS Windows 7 or newer (Steam client supports Windows 10 and later since 2024-01-01); CPU Dual core from Intel or AMD at 2.8 GHz; RAM 4 GB; GPU NVIDIA GeForce 8600/9600GT, ATI/AMD Radeon HD2600/3600; DirectX Version 11; Storage 60 GB

The settings that cost the most frames

Menu names and sections below are the ones in the game. Start here, test after each change, and keep the ones that give a clear gain.

  • Resolution (Settings > Video): native resolution, or lower for more frames. Native resolution gives the clearest image; lowering it is the blunt way to gain frames on a weak GPU.
  • Rendering API (Settings > Video > Options): DirectX 11. Guides report DX11 as the fastest on most modern systems; Vulkan is slightly behind and worth a quick test on your PC.
  • Effects Quality (Settings > Video > Advanced options): Low. Spell effects are the biggest cost in a teamfight, and Low keeps the fight readable.
  • Shadow Quality (Settings > Video > Advanced options): Low. Shadows make heroes easier to pick out; most competitive guides land on Low or Medium.
  • Anti-Aliasing (Settings > Video > Advanced options): Off. Jagged edges are hard to see in the stylised art; the free frames matter more.
  • Ambient Occlusion (Settings > Video > Advanced options): Off. One of the costliest toggles (roughly 5-15% by guide estimates) with no gameplay benefit.
  • High Quality Water (Settings > Video > Advanced options): Off. Expensive on weaker GPUs and purely cosmetic.
  • Animate Portrait (Settings > Video > Advanced options): Off. Animated hero portrait in the HUD; it costs frames and adds nothing to gameplay.
  • Atmospheric Fog / Caustics (Settings > Video > Advanced options): Off. Cosmetic lighting effects that cost a few percent.
  • VSync (Settings > Video > Advanced options): V-Sync adds input lag; use an FPS cap with G-Sync/FreeSync instead.
  • Maximum frames per second allowed (Settings > Video > Advanced options): 240 (in-game maximum; use the +fps_max launch option to go higher). The in-game slider tops out at 240; the +fps_max launch option removes that limit.

Smaller options

SettingWhereRecommended
Display ModeSettings > VideoFull Screen
Texture QualitySettings > Video > Advanced optionsLow on the Low preset up to High on Ultra

Upscaling and frame generation

Upscalers: FSR. No frame generation is listed. No Reflex or Anti-Lag 2 option is listed.

  • FidelityFX Super Resolution (Settings > Video > Advanced options). Options: Off (Game Screen Render Quality 100%), FidelityFX Super Resolution (lower Game Screen Render Quality first). FSR 1 only appears once Game Screen Render Quality is below 100%; it blurs at 1080p, so use it only if the GPU is the limit.

How to show the FPS counter

  1. Click the cogwheel at the top left of the main menu to open Settings, then open the Options tab.
  2. Open the advanced options and, in the Miscellaneous column, turn on "Display Network Information".
  3. FPS appears at the top right during a match (with ping and packet loss). Alternative: open the console and type cl_showfps 1.

Launch options for Dota 2

  • -dx11: Forces the DirectX 11 renderer.
  • -vulkan: Forces the Vulkan renderer.
  • -high: Runs Dota 2 with high CPU priority.
  • +fps_max 0: Removes the in-game 240 FPS ceiling (0 = unlimited).
  • -map dota: Loads the map at launch to shorten load times.

More Dota 2 tips

Test DX11 against Vulkan

  • In Steam: right-click Dota 2 > Properties > General > Launch Options.
  • Add -dx11, play a match and watch the FPS counter; then try -vulkan instead.
  • Keep whichever gives the higher and steadier FPS on your PC.

Use FSR only when the GPU is the limit

  • Open Video > Advanced options and lower "Game Screen Render Quality" below 100%.
  • The "FidelityFX Super Resolution" checkbox appears; turn it on.
  • Setting Render Quality back to 100% turns FSR off again. At 1080p, lowering other settings first usually looks better.

Dota is CPU-limited

  • Close browsers and overlays while playing; a single busy core is what caps frame rate.
  • Enable XMP/EXPO for your RAM in the BIOS.
  • Lowering graphics will not add much once the CPU is the bottleneck.

Quick checks that help in any game

Before you spend an hour in the menus, rule out the common system-level causes of low FPS and stutter in Dota 2:

  • Update your graphics driver and restart. Game-ready drivers often include fixes for new releases.
  • Set the Windows power plan to Balanced or High performance, and turn on Game Mode.
  • Enable the XMP or EXPO memory profile in your BIOS. Many PCs run RAM below its rated speed, which costs frames in CPU-limited games.
  • Install the game on an SSD, not a hard drive, to avoid hitching when assets stream in.
  • Close browsers, launchers and overlays you do not need. Each one takes CPU time and memory.
  • Watch your temperatures. A CPU or GPU that overheats lowers its clocks, and the result is lower, uneven frame rates.
  • Match the frame cap to your monitor, or use adaptive sync so a steady frame rate does not tear.

How to test a change properly

Change one setting at a time and repeat the same short test, ideally in the same place or mode, while watching both the average and the lowest frame rates. The 1% lows tell you more about smoothness than the average does. If a setting changes the picture a lot but the frame rate barely moves, put it back; if it moves the frame rate a lot and the picture barely changes, keep it lower. Check whether the GPU or CPU is the one running at 95 to 100 percent: lowering resolution-related settings only helps when the GPU is the bottleneck, while lowering view distance, crowd and physics options is what helps when the CPU is.

Best settings for your hardware

Every PC is different, so the best choice depends on your CPU, graphics card and monitor. On DontLag you can find recommended settings for each hardware tier on the Dota 2 settings page.

Sources

Related guides