For a first Rocket League camera, set FOV to 110, Distance to 260 to 280, Height to 90 to 120, Camera Shake off and Transition Speed around 1.0 to 1.2, then adjust Stiffness and Swivel Speed to taste. These are common starting values among experienced players, not official recommendations. Season 24, which began on 23 September 2026, also added a Free Look camera with updated default mouse and keyboard bindings.
What each camera option does
- Camera Shake: shakes the view on boost and impacts. Most players turn it off because it makes the ball harder to track.
- Field of View (FOV): how wide the view is. A higher FOV shows more of the field but makes everything look smaller.
- Distance: how far the camera sits behind the car.
- Height: how high the camera sits above it.
- Angle: how far the camera tilts down.
- Stiffness: how closely the camera follows the car. Low values feel looser, high values feel locked to the car.
- Swivel Speed: how fast the camera turns when you look around or use ball cam.
- Transition Speed: how fast the camera switches between ball cam and car cam.
- Ball Cam: a toggle and a default state.
Camera and controller settings change how this kind of play feels.
Common starting values
| Setting | Typical value |
|---|---|
| FOV | 110 (most common) |
| Distance | 260 to 280 |
| Height | 90 to 120, average around 104 |
| Angle | about -3 to -3.6 |
| Stiffness | 0.35 to 0.50 (some guides say 0.4 to 0.7) |
| Swivel Speed | 4.0 to 7.0 (pros range from about 1.8 to 10) |
| Transition Speed | 1.0 to 1.2 |
| Camera Shake | Off |
Guides disagree on some scales. One fan guide quotes an Angle of -0.3 to -0.5, probably from a different game version, so compare against what your own menu shows. Treat the table as a starting point and change one value at a time.
Free Look
Season 24 added a Free Look camera for both mouse and keyboard and controller. It comes with updated default mouse and keyboard bindings meant for new players, and there is a new option for a center dot reticule. If you play on keyboard, check your bindings after the update, because the defaults changed. The Free Look camera is separate from ball cam, which still toggles between following the ball and following the car.
How to tune it
- Start with the table above and play a few matches in Free Play.
- If you lose sight of the ball, lower Distance or raise FOV.
- If the car feels hard to read, raise Height slightly.
- If the view feels sluggish, raise Swivel Speed; if it feels jumpy, lower it.
- Keep the settings for at least a week before you change them again.
Controller settings
| Option | Range | Default |
|---|---|---|
| Controller Deadzone | 0.00 to 0.75 | not confirmed |
| Dodge Deadzone | 0.10 to 1.00 | not confirmed |
| Steering Sensitivity | 1.00 to 10.00 | 1.00 |
| Aerial Sensitivity | 1.00 to 10.00 | 1.00 |
Common recommendations for steering and aerial sensitivity are about 1.2 to 2.0, with steering lower than aerial. Guides disagree on the Controller Deadzone: values from 0.04 to 0.10, 0.15 and even 0.40 to 0.60 are quoted. A Dodge Deadzone around 0.50 to 0.60 is the one most used by pros. If you play on a controller, start low and raise the values only if the car feels twitchy.
Quick tips
- Use ball cam by default and learn when to turn it off for car-focused moments.
- Do not copy a pro setup blindly; they play on different hardware and have years of habits.
- Smooth gameplay matters too; see the FPS and lag guide.
More on the game is on the Rocket League page.