Oil gives you plastic and sulfur, which you need for blue science. Start with basic oil processing for petroleum gas, then switch to advanced oil processing and add cracking once you want a full setup. These are the recipes and ratios for Factorio 2.0 and 2.1.
The recipes
| Recipe | Time | Inputs | Outputs |
|---|---|---|---|
| Basic oil processing | 5 s | 100 crude oil | 45 petroleum gas |
| Advanced oil processing | 5 s | 100 crude oil, 50 water | 25 heavy oil, 45 light oil, 55 petroleum gas |
| Coal liquefaction | 5 s | 10 coal, 25 heavy oil, 50 steam | 90 heavy oil, 20 light oil, 10 petroleum gas |
| Heavy oil cracking | 2 s | 40 heavy oil, 30 water | 30 light oil |
| Light oil cracking | 2 s | 30 light oil, 30 water | 20 petroleum gas |
Refineries turn crude oil into several products.
Both cracking recipes run in chemical plants. Basic oil processing is easy, but it gives only petroleum gas. Advanced oil processing also makes heavy and light oil, which you crack down into petroleum gas so nothing is wasted.
Standard ratios
For advanced oil processing the classic ratio is 20 refineries to 5 heavy oil crackers to 17 light oil crackers. A smaller ratio of 8 : 2 : 7 is close enough for most builds. With coal liquefaction the ratio is 60 : 39 : 55, or 12 : 8 : 11 in smaller form. With one of each cracker, the petroleum gas output is about 19.5 per second for advanced processing, 9 per second for basic and about 11.2 per second for coal liquefaction.
Plastic and sulfur
- Plastic bar: 1 coal plus 20 petroleum gas makes 2 plastic bars in a chemical plant, in 1 second.
- Sulfur: 30 petroleum gas plus 30 water makes 2 sulfur in a chemical plant, in 1 second.
With the Space Age expansion there are alternatives made in the biochamber: plastic from 4 yumako mash and 1 bioflux (3 plastic, 2 seconds), and biosulfur from 5 spoilage and 1 bioflux (2 sulfur, 2 seconds). Sulfur can also come from advanced carbonic asteroid crushing in space. Chemical (blue) science itself needs 2 engine units, 3 advanced circuits and 1 sulfur, which is why oil is the gate to it; the pack recipes are listed in the beginner guide.
Building it step by step
- Place pumpjacks on the crude oil patch and pipe the oil to your refinery area.
- Start with basic oil processing to get petroleum gas flowing for plastic and sulfur.
- Research advanced oil processing when you need more output, and bring in water for it.
- Add heavy and light oil cracking in chemical plants so heavy and light oil never back up.
- Use the surplus for other products, such as solid fuel.
Common pitfalls
- Blocked outputs. If heavy or light oil fills its pipe and nothing consumes it, the refinery stops, and that stops petroleum gas too. Crack everything, or use the surplus.
- Mixing fluids. A pipe can hold only one fluid type. Keep each fluid in its own network and use underground pipes to cross.
- Wrong ratios. Too few crackers means oil backs up; too many just idles. Start from the ratios above and adjust once you see what saturates.
Quick tips
- Use a storage tank as a buffer between refinery and consumers.
- Keep chemical plants for plastic and sulfur close to the refinery output to keep pipes short.
- Check the Factorio page if the game runs slowly on a large oil base.
Version note: Factorio 2.1 became stable on 23 October 2026. The refinery got new graphics, pumpjacks can be flipped, and pipelines carrying different fluids no longer merge but show a warning instead. The recipes and ratios above are the ones from 2.0.