BL2: Tune PhysX
- In BL2, open Options > Video and set PhysX to Low or Medium; High causes big drops in fights with lots of effects.
- In BL2, on an AMD or Intel GPU PhysX runs on the CPU, so set it to Low or Off there.
The biggest frame costs in Borderlands 2 are PhysX. Start there, then work through the stutter checklist.
Updated . Game data researched November 2026.
PhysX
PCPer measured the GTX 680 at about 70 fps on High PhysX against 90 on Medium at 1080p, and AMD cards, which run PhysX on the CPU, dropped from about 71 to 33 fps. Larger simulations run on a single CPU thread, so even a fast GPU is held back.
Values shown are what we pick for max FPS. Section names follow the in-game menu.
| Setting | Low-end value |
|---|---|
| Resolution | Your monitor's native resolution; scale with the upscaler instead |
| VSync | Off; use G-Sync or FreeSync with an FPS cap instead |
| Frame Rate | 3 below your refresh rate (141 on 144 Hz); uncapped for max FPS |
| Field of View | 90-100 |
| Anisotropic Filtering | 2x |
| FXAA | Off |
| Ambient Occlusion | Off |
| Depth of Field | Off |
| PhysX | Off |